How to Build a Concrete Foundation 

A foundation is the base for every structure. The size and type of foundation you’re going to construct will heavily depend on the kind of structure you’re going to construct above it, whether commercial or industrial. Even a patio, garage, foundation and deck needs to have a concrete foundation. This is an essential component of your house, so constructing it should be put into consideration. In this article, we will show you how foundation repair in Grapevine is done.

Pick a Site 

If you’re building a structure, make sure you investigate the soil’s condition on the location where you’re going to construct something. There are types of soil that will tell you what type of foundation you need, this is to avoid issues in the future.  

Concrete Foundation

Have it Surveyed 

Before you start the construction, call a professional to survey the area. This is necessary to determine and locate the foundation’s actual corners to successfully form the foundation. After that, you can start digging. You will need the help of an excavator contractor for this.  

Choosing the Type of Foundation 

Like mentioned, the type of foundation will depend on the type of structure and the area located. Shallow foundations are built on hard surfaces and level ground. It’s less than 3 feet and usually used for the fountain, foundation or patio.  

Deep foundations are more than 3 feet which are built for complicated projects like a detached garage or shed, or any structure that is built on the hill.  

Set the Footings 

Make sure to add 2 feet across each side. This will make you space the form work and will give you more space where the foundation is going to be laid out. Align the 2×10 inches boards to build the forms for the footings. Situate the boards in the foundation size and shape you planned.  

Square and Level the Form  

Before you do this step, make sure that the formwork is firmly and strongly in place because the concrete can be heavy. Squaring and leveling the form is made after you pour the concrete. Again, check out the formwork if it’s in the right place.  

Make Your Concrete 

This time, you have to make a mixture of the concrete you’re going to pour in the foundation. First, dump the cement (dry) in the wheelbarrow. Slowly add some water and then stir. Thoroughly stir the mixture, make sure there’s only enough water to avoid getting the mixture soupy.  

Finish the Concrete 

The final step is finishing your concrete. First, let it dry. Once it dries thoroughly (make sure it really is), you have to remove the forms. Wait for at least 24 hours after you pour the concrete when you do this. To avoid having cracks, keep the concrete wet. Soak with water using a hose at least three times a day, depending on how hot it is outside. If it rains, make sure you cover it with a pad so it won’t be uneven.   

Leave a Reply

Your email address will not be published. Required fields are marked *